MOTUL DOT4 LV brake fluid

For hydraulic brake and clutch circuits. 100% Synthetic fluid. Long-lasting. USE | MOTUL DOT 4 LV (Low Viscosity), is especially recommended for hydraulic brake and clutch circuits, in vehicles equipped with ESP (Electronic Stability Program), ABS (Anti-lock Braking System) and ASR (Acceleration Slip) regulation.); It has a high boiling point and at the same time shows extraordinary behavior at low temperatures. STANDARDS: FMVSS 116 DOT 3 / 116 DOT 4, ISO 4925 (Classes 3, 4 and 6) and SAE J1703 J1704. BENEFITS | Long-lasting brake fluid: The high dry boiling point of MOTUL DOT 4 LV (267°C / 513°F) is higher than that of the DOT 4 ISO Class 6 standard (260°C / 500°F mini) and its brake fluid boiling point* is also higher than DOT 3 (140°C / 284°F mini) and DOT 4 (155°C / 311°F min) allowing the product to work for longer. As is known, fluids of the DOT 3, DOT 4 and DOT 5.1 categories have the property of absorbing moisture from the air, which reduces their boiling point and consequently the active safety of the vehicle. *The wet boiling point is the simulation of the fluid operating for a full year. Specially designed for ESP, ABS and ASR: The cold viscosity of MOTUL DOT4 LV (675 mm�/s at -40�C / -40�F) is lower than that of a DOT 5.1 (up to 900 mm�/s), that of a conventional DOT 4 (up to 1800 mm�/s) and that of a DOT 3 (up to 1500 mm�/s), allowing excellent liquid circulation at very low temperatures between the microvalves of the Anti-lock system to offer a better and faster response of the ESP, ABS and ASR systems. It is completely neutral in action compared to the gaskets used in brake circuits. Anti-corrosion. RECOMMENDATIONS | Can be mixed with DOT 3, DOT 4 and DOT 5.1 NON-SILICONE BASED. Does not mix with silicone (DOT 5 which is silicone based) or mineral-based fluids (LHM). Store brake fluid in its original container, tightly closed to prevent moisture absorption. Aggressive chemical if it comes into contact with hands, paints or varnishes. If it comes into contact with skin, rinse thoroughly with water. Change interval: 12 to 24 months as recommended by the manufacturers. PROPERTIES Visual Color: Yellow Viscosity at 100 °C (212 °F): 2.1 mm�/s Viscosity at -40 °C (-40 °F): 675.0 mm�/s Dry boiling point: 267.0 °C / 513.0 °F Wet boiling point: 172.0 °C / 342.0 °F